奥地利JAKO波登管压力表等产品现货资源享受批发价格，库存大量现货，一件起订，顺丰包邮。奥地利JAKO波登管压力表等产品现货当天发送，并配套资深技术与售后保修服务。特价采购，正品保证，品质有保障，价格优惠，货期短，型号全，价格低，全网最低报价，口碑好，品质好，值得信赖，大品牌。以下文章是深圳科电远扬小编为您精心挑选的有关《奥地利JAKO波登管压力表型号价格货期查询》的问题介绍，部分内容来源于网络收集整理，不一定正确，仅供参考，有兴趣的还请详细阅读一下，谢谢。

奥地利JAKO波登管压力表/双金属温度计/温度表 ：JAKO一直的压力和温度计量领域的**生产商之一，60岁及仪器仪表制造商，在奥地利和国外客户信赖的合作伙伴（目前，我们的产品和服务，提供超过30个国家）。我们的生产仍然是基于今天在维也纳奥地利制造和测量设备。
JAKO的客户包括经销批发合作伙伴以及企业销售安装加热，通风，空调和制冷系统，设备工程公司，以及在这个过程中，重工业的仪器和设备制造商，例如在行业集装箱建筑，压缩机工程，锅炉工程，组件工程。
压力和温度是*常见的物理计量单位在许多应用领域的经营和生产过程控制和成本效益的措施和关键参数。PINTER压力变送器

JAKO主要产品及型号：

JAKO压力表：

• 标准型波登管压力表
• 工业型波登管压力表
• 高精密压力表
• 隔膜压力表
• 胶囊压力表
• **压力表
• 差压计
• 压力表与变送器
• 电子压力计量
• 附件和安装部件

 

JAKO压力表部分产品型号：
Fig. 1 Compact pressure gauges
for stand-alone process connectionNS 40; NS 50; NS 63
based on EN 837-1

Fig. 101 Compact pressure gauges
with 3-hole front flange for easy flush mountingNS 40; NS 50; NS 63
based on EN 837-1

Fig. 102 Compact pressure gauges
with rectangular front ring and bracket attachment on the back for flush mountingNS 40; NS 50; NS 63
based on EN 837-1
All-purpose pressure gauges
JAKO all-purpose pressure gauges are cost-effective solutions for a wide range of applications in the sanitary, heating and venitlation engineering as well as in the apparatus and equipment engineering sectors.

Fig. 2 All-purpose pressure gauges
for stand-alone process connectionNS 80; NS 100; NS 160
based on EN 837-1

Fig. 201 All-purpose pressure gauges
with 3-hole front flange for easy flush mountingNS 80; NS 100
based on EN 837-1

Fig. 203 All-purpose pressure gauges
with attachment rim on the back for attachment and surface mountingNS 80; NS 100
based on EN 837-1
Heating pressure gauges
JAKO heating pressure gauges are used for pressure and content monitoring in closed loop heating systems. A green reading range (green banner) on the dial indicates the operating pressure, a red mark the maximum admissible valueand a set value pointer that can be adjusted from the outside shows the required operating pressure.

Fig. 5 Heating pressure gauges
with special scale for content measurement in closed loop heating systemsNS 63; NS 80
based on EN 837-1
Hydrometers
JAKO hydrometers indicate the measured pressure on a twin scale in bar and in mWs.

Fig. 6 Hydrometers
with twin scale for direct reading in meter water column (MWC) and in barNS 80; NS 100
based on EN 837-1
Combined pressure and temperature gauges
JAKO combined pressure and temperature gauges save space and money and are designed for the simultaneous measurement of pressure and temperature at a single point of measurement without high measurement accuracy requirements.

Fig. 80 Combined pressure and temperature gauges
for the combined pressure and temperature measurement, center back mountNS 80

Fig. 81 Combined pressure and temperature gauges
for the combined pressure and temperature measurement, center back mountNS 80
Glycerine filled pressure gagues
JAKO gylcerine filled pressure gauges ensure good pointer readibility and a longer life cycle also at measuring points with mechanical vibrations and pulsating pressure loads.

Fig. 130 Glycerine filled pressure gagues
for stand-alone process connectionNS 40; NS 50; NS 63; NS 100
based on EN 837-1

Fig. 137 Glycerine filled pressure gagues
with 3-hole front flange for easy flush mountingNS 40; NS 50; NS 63; NS 100
based on EN 837-1

Fig. 136 Glycerine filled pressure gagues